Conveyor belt fastener tool
M6 |
M8 |
M10 |
140E |
1.5" |
2.5" |
190E |
2" |
3" |
Binding simple, fast, only a set of special tools, with the help of electric (gas) wrench, binding can be carried out, and many people can work at the same time;
Belt buckle stapling method
1 the belt buckle with a nail side up into the buttoning machine, used to wear a belt buckle positioning.
2 conveyor belt into the belt buckle, must meet the bottom position, buckle belt ends than narrow around 5cm.
3 use a specially configured hammer, do not use more than 6 pound hammer, to tap A (rear position). A trap, then press B ( the highest position ) to make a set of conveyor belt on a nail bent again, automatically.
4 first set a middle button,then set the left (right ) of a buckle,then from right (left ) are booked up.
The product features:
1 Good quality: button button when the conveyor belt three point positioning using cross order button so that the conveyor belt extrusion deformation of the uniform distribution to ensure the straightness of the nail fastener joints from the conveyor belt thickness changethe influence of each buckle can be set.
2 Convenient operation: conveyor belt can be conveniently mounted button machine on the belt buckle. Thus greatly save button button operation auxiliary time can be easily mastered can ensure operation quality of operating environment requirements low.
3 Long service life: the buttoning machine key parts with special steel solidreliable.
Product specifications: according to the length of the buttoning machine specifications are 650mm1000mm
Conveystar buttoning machine continuously updated, quick operationservice life are rank first among similar products, the bold use of lighthigh